M5VM2E10 Series

 

M5VM2E10 Series Valve Manifolds

 

The “2E” series of Manifolds have two equalizing valves, two block (Shut Off) valves and one vent valve. These 5 Valve Manifolds are being used in place of older type of “piped-up” 5 Valve Manifolds for field meters and D.P. transmitters. These Manifolds are rugged in construction to withstand high pressures and temperatures. These Valve Manifolds are rated for pressures as high as 6000 PSI at 200 deg F. or 4000 PSI at 500 deg F. with PTFE packing. For higher temperatures GRAFOIL Gaskets are used.

 

M5VM2E10 series Valve Manifolds consists of two block valves, two equalizing valves and one common vent valve for purging both high and low pressure sides by manipulating one equalizing valve at a time. This type of Manifold prevents an error due to leakage between high and low pressure connections as two equalizing valves have been provided. These are flanged on both sides for mounting directly to D.P. transmitters having 54mm (2-1/8”) center to center distance. Any other center to center distance also available on special order. The oval flanges supplied with the D.P. transmitters are used on the process side of these Manifolds for piping connection. This model provides easy installation and comes complete with four mounting bolts and two PTFE “O” rings for ready installation.

520 Beacon Place, Oklahoma City, Oklahoma 73127
Telephone: 405 241-8571
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.