Manifold Valves

1E Series Manifold Valve

2E Series Manifold Valve

 

MPP-USA's manifold valves provide a convenient solution for the mounting of gauge and absolute pressure transmitters and pressure switches.  MPP-USA offers manifold valves in direct mount and remote mount configurations.

MPP-USA's 2-valve, 3-valve, and 5-valve manifolds are high performance needle valves designed to operate at pressures up to 10,000 psig with stanadrd PRFE gland packing.  The stem packing is located below the stem threads to ensure no contact between system process and threads.  The gland nut is tightened and secured into posuition by a lock nut.  The stem housing is mounted into the manifold or valve body and locked into place to prevent accidental lossening of the stem housing.

M5VM1E10 series Valve Manifolds have been designed for mounting directly on the D.P. transmitter having 54mm (2-1/8”) centre to centre distance. Any other centre to centre distance also available on special order.

M5VM1E20 series Valve Manifolds consist of two block valves, one equalising valve and two separate vent valves for purging of the high and low pressure sides.

M5VM1E30 series Valve Manifolds are being used in place of older type of “piped-up” 5 Valve Manifolds for field meters and D.P. Transmitters.

M5VM2E10 series Valve Manifolds consists of two block valves, two equalizing valves and one common vent valve for purging both high and low pressure sides by manipulating one equalizing valve at a time.

M5VM2E20 series Valve Manifolds consists of two block valves, two equalizing valves and one common vent valve for purging for both high and low pressure sides by manipulating one equalising valve at a time.

520 Beacon Place, Oklahoma City, Oklahoma 73127
Telephone: 405 241-8571
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.